TRA Press Room

NEWS FOR IMMEDIATE RELEASE

Mahr Federal Inc.
Gary Robison
1144 Eddy Street
Providence RI 02905 USA
(401) 784-3275

Media Contact:
THOMAS RANKIN ASSOCIATES
Tom Rankin, APR
401-884-4090
tomr@trankin.com

Click on image to download 300 dpi JPG

Series 300P Indicating Snap Gages from Mahr Federal Offer Speed, Accuracy, Flexibility and Economy

PROVIDENCE, RI -- Mahr Federal's Series 300P Indicating Snap Gages are an excellent choice for highly accurate and reliable measurement results on cylindrical parts with narrow tolerance ranges. The gages are available in a variety of sizes with measuring capacity increasing in 1" (25 mm) increments up to 9" (229 mm). Series 300P Snap Gages can be configured with a number of different indicators and all are fully adjustable with positive position locking at any point within the gaging range.

"Snap gages are one of the easiest, fastest, most accurate and economical ways of making OD measurements a shop can employ," said George Schuetz, Director of Precision Gages for Mahr Federal. "They are very versatile. They can be hand held to measure parts in place, or mounted on bench stands. They can be set up with different indicators for any number of readout configurations. Different anvil styles adapt to a host of measurement conditions. And parts literally 'snap' into place, which assures good part alignment, and along with positive position locking, virtually eliminates operator influence on the measurement."

With a standard dial indicator installed, the measuring range of Mahr Federal Series 300P adjustable snap gages is .020", with a resolution of .0001". But 300P Snap Gages can also accommodate digital indicators, air probes, or electronic probes using the same standard 3/8" diameter mounting. With an electronic probe and an amplifier, resolution of 10 " can be achieved, for tolerance measurements tighter than .0005".

Mahr Federal Series 300P Snap Gages are available with a wide range of flat, grooved and blade anvil configurations. Special custom anvils are also available. Large 15.5 mm/.61" square tungsten carbide anvils provide flat, parallel, long lasting working surfaces. Anvils can be side-relieved or straddle-milled to provide access in difficult part profiles. Blade widths as narrow as .010" (0.25 mm) and depths up to .25" (6.35 mm) ensure access in deep, narrow diameters or grooves, even against perpendicular surfaces. All Series 300P Snap Gage anvils feature radiused edges to eliminate part marring.

MFIinfo

Mahr Federal Inc., a member of the Mahr Group, has over 150 years of experience providing dimensional measurement solutions to fit customer application needs. The company manufactures and markets a wide variety of dimensional metrology equipment, from simple and easy-to-use handheld gages to technically advanced measurement systems for form, contour, surface finish and length. Mahr Federal is also well known as a producer of custom-designed gages and a provider of calibration and contract measurement services. Mahr Federal's calibration laboratories are accredited to ISO/IEC 17025:2005 NVLAP Lab Code 200605-0 (see our Scope of Accreditation for accredited calibration processes). For more information visit www.mahrexactly.com

For additional information, contact:
Marketing
Mahr Federal Inc.
1144 Eddy Street
Providence, RI 02905 USA
Tel: (800) 343-2050 or (401) 784-3100
Email: mkt.nafta@mahr.com
Website: www.mahrexactly.com

Photo Caption
<< Mahr300P_SnapGage.jpg >>
Mahr Federal's Series 300P Indicating Snap Gages are an excellent choice for highly accurate and reliable measurement results on cylindrical parts with narrow tolerance ranges. The gages are available in a variety of sizes with measuring capacity increasing in 1" (25 mm) increments up to 9" (229 mm).

ref: MFI8471.0509


Return to Main Mahr Federal Page


 

Home | TRA Press Room | Portfolio | Services | TRA Advisor | About TRA | e-mail Us

Thomas Rankin Associates