TRA Press Room

NEWS FOR IMMEDIATE RELEASE

Mahr Federal Inc.
Gary Robison
1144 Eddy Street
Providence RI 02905 USA
(401) 784-3275

Media Contact:
THOMAS RANKIN ASSOCIATES
Tom Rankin, APR
401-884-4090
tomr@trankin.com

Click on image to download 300 dpi JPG

Mahr Federal Introduces Redesigned MarShaft(TM) Scope Plus

-- Ground-up redesign twice as accurate as competitive models
-- Powerful new controller brings Mahr form expertise to optical shaft measurement
-- EasyShaft(TM) software simplifies/optimizes multi-function measurement routines

PROVIDENCE, RI -- Mahr Federal has introduced a new, totally redesigned version of its MarShaft(TM) Scope, its high-precision, fully automatic optical measuring system for dimensional testing of turned parts. The new MarShaft Scope Plus is now twice as accurate as previous -- and competitive -- models. It offers micron level measurements, and includes a new MarWin®-based controller and system architecture that opens new levels of machine capability. The new MarShaft Scope Plus also incorporates new EasyShaft(TM) operating software that facilitates easy and quick measurements. The optional ProfessionalShaft(TM) software high-level script programming allows virtually unlimited customizing capability for these systems.

"The goal of this ground-up redesign was to apply Mahr's extensive experience in form, surface, and contour measurement to the world of optical shaft measurement and fundamentally change what is possible," said Pat Nugent, Mahr Federal Vice President for Metrology Systems. "In addition to mechanical enhancements that improve accuracy, we're now using the same electronics and controller architecture, and the same MarWin operating platform, as our high-end form testers. This, in concert with the new EasyShaft software allows users to do things with these systems that have never been possible before."

In terms of accuracy, the error limit for measuring length with the new MarShaft Scope Plus is (2+L/ 125) µm, compared to (5+L/ 100) µm for the previous version and leading competitive models. For diameter, the error limit for the MarShaft Scope Plus is (1+L/ 125) µm, compared to (2+L/ 100) µm for competitive models. "This groundbreaking level of accuracy for an optical shaft measuring system allows high precision measurements on turned parts that typically couldn't be measured by these types of systems," said Nugent.

Operational software for the MarShaft Scope Plus comes in two levels: basic and professional. Basic EasyShaft software provides simple touch screen operation utilizing selectable feature icons, many of which are easily recognizable from the standard Feature Control Frames that the user sees on their part drawings. Multi-feature measurement routines can be easily constructed without programming knowledge, and EasyShaft will automatically optimize them to assure the fastest possible measurement. All MarShaft Scope Plus systems are equipped with touch screens with intelligent multi-touch gestures built in, so zooming in on specific features is as easy as the two finger "pinch to zoom" we all know from typical tablets. Moving the camera view around the machine is done by a flick of the finger on the screen just as you would do to scroll up or down on a tablet.

ProfessionalShaft script-level programming of the new MarShaft Scope Plus allows expert users virtually unlimited access to the machine's capabilities. This offers tremendous flexibility for custom application development, either by users or by Mahr Application Specialists. Highly complex measuring, control and evaluation routines for special parts can be developed, but activating them can remain as simple as touching an onscreen icon or button.

The MarShaft Scope Plus is suitable for use in both production and metrology lab environments. Optional equipment includes a tactile measuring system with an inductive measuring probe to measure such things as run-out and straightness. All measuring runs are fully automatic and thus free of operator influence. The new MarShaft Scope Plus is available in a number of sizes and configurations to match a multitude of applications.

MFIinfo

Mahr Federal Inc., a member of the Mahr Group, has over 150 years of experience providing dimensional measurement solutions to fit customer application needs. The company manufactures and markets a wide variety of dimensional metrology equipment, from simple and easy-to-use handheld gages to technically advanced measurement systems for form, contour, surface finish and length. Mahr Federal is also well known as a producer of custom-designed gages and a provider of calibration and contract measurement services. Mahr Federal's calibration laboratories are accredited to ISO/IEC 17025:2005 NVLAP Lab Code 200605-0 (see our Scope of Accreditation for accredited calibration processes). For more information visit www.mahrexactly.com

For additional information, contact:
Marketing
Mahr Federal Inc.
1144 Eddy Street
Providence, RI 02905 USA
Tel: (800) 343-2050 or (401) 784-3100
Email: mkt.nafta@mahr.com
Website: www.mahrexactly.com

Photo Caption
<< MarShaftScope750Plus.jpg >>
Mahr Federal has introduced a new, totally redesigned version of its MarShaft(TM) Scope, its high-precision, fully automatic optical measuring system for dimensional testing of turned parts. The new MarShaft Scope Plus is now twice as accurate as previous -- and competitive -- models. It offers micron level measurements, and includes a new MarWin®-based controller and system architecture that opens new levels of machine capability.

ref: MFI8665.0713


Return to Main Mahr Federal Page


 

Home | TRA Press Room | Portfolio | Services | TRA Advisor | About TRA | e-mail Us

Thomas Rankin Associates