TRA Press Room

NEWS FOR IMMEDIATE RELEASE

Mahr Federal Inc.
Gary Robison
1144 Eddy Street
Providence RI 02905 USA
(401) 784-3275

Media Contact:
THOMAS RANKIN ASSOCIATES
Tom Rankin, APR
401-884-4090
tomr@trankin.com

Click on image to download 300 dpi JPG

Kelvin Redefined with the Help of Mahr Form Measurement System

-- German PTB (Physikalisch-Technische Bundesanstalt) defines the unit kelvin with the help of the reference formtester MarForm MFU 110 WP from Mahr

PROVIDENCE, RI -- In conjunction with the General Conference on Weights and Measures (CGPM), the kelvin, the basic unit of thermodynamic temperature, is currently being newly defined at the PTB (Physikalisch-Technischen Bundesanstalt) in Braunschweig, Germany, the counterpart of NIST in the US. The goal of PTB's portion of the program is a precise determination of the Boltzmann constant k, the conversion factor between thermal and mechanical energy. The project is being done with the help of a highly accurate reference formtester from Mahr, the MarForm MFU 110 WP, which includes both tactile and optical sensors, and provides accuracy into the nanometer range.

In October of 2011, the CGPM adopted a plan to redefine four of the seven base units of the International System of Units (SI) in terms of the invariants of nature--the fundamental physical constants or properties of atoms. A previous example of this was the redefinition of the meter in 1983, which links it to an exact value of the speed of light in a vacuum. The Conference recommended that efforts be made by the various National Metrology Institutes to reduce the uncertainties of these constants.

The CGPM also noted that, "The kelvin is currently defined in terms of an intrinsic property of water that, while being an invariant of nature, in practice depends on the purity and isotopic composition of the water used." Instead, the Conference suggested that it was "possible to redefine the kelvin so that it is linked to an exact numerical value of the Boltzmann constant k," which links temperature to mechanical energy.

As part of their work to precisely determine the Boltzmann constant, PTB needed to define absolute helium pressures. These were realized with the help of a pressure balance, the essential components of which were piston-cylinder systems. For the precise calculation of pressure, the geometry of the pistons and cylinders at ambient pressure had to be known exactly: hence, PTB's use of the reference formtester from Mahr. This highly precise reference unit is the world's leading instrument for tactile distance and diameter measurements in the measuring range of up to 180 mm.

PTB used the White Point optical stylus system on the MarForm MFU 110 WP to measure the pistons and cylinders. White Point is an optical (interferometrical) stylus system for form measuring machines which allows form and diameter measurements of precision mechanical parts with tolerances of less than 1 Ám. The optical system is based on a novel concept of short coherence heterodyne interferometry working with two wavelengths. Typical parameters are roundness, straightness, parallelism, angle and diameter. The small optical probe allows fast non-contact measurements of very small and hard-to-access geometries, and provides optical contact at two different angles.

The first approach to the calculation of the measurement uncertainty of the generated 3D geometry data showed that the dimensional 3D standard measurement uncertainties only amounted to 7 nm for the piston and 15 nm for the cylinder. This results in a relative measurement uncertainty for the cross-sectional area of 0.7 x 10-6, which may well contribute to decreasing the measurement uncertainty for the Boltzmann constant as a whole.

MFIinfo

Mahr Federal Inc., a member of the Mahr Group, has over 150 years of experience providing dimensional measurement solutions to fit customer application needs. The company manufactures and markets a wide variety of dimensional metrology equipment, from simple and easy-to-use handheld gages to technically advanced measurement systems for form, contour, surface finish and length. Mahr Federal is also well known as a producer of custom-designed gages and a provider of calibration and contract measurement services. Mahr Federal's calibration laboratories are accredited to ISO/IEC 17025:2005 NVLAP Lab Code 200605-0 (see our Scope of Accreditation for accredited calibration processes). For more information visit www.mahrexactly.com

For additional information, contact:
Marketing
Mahr Federal Inc.
1144 Eddy Street
Providence, RI 02905 USA
Tel: (800) 343-2050 or (401) 784-3100
Email: mkt.nafta@mahr.com
Website: www.mahrexactly.com

Photo Caption
<< MarForm_MFU_100_WP_PTB_Piston.jpg >>
As part of their work to precisely determine the Boltzmann constant, PTB needed to define absolute helium pressures. These were realized with the help of a pressure balance, the essential components of which were piston-cylinder systems. In this visual simulation, PTB is using the White Point optical stylus system on the MarForm MFU 110 WP to calculate the geometry of the system's pistons and cylinders. White Point is an optical (interferometrical) stylus system for form measuring machines which allows form and diameter measurements of precision mechanical parts with tolerances of less than 1 Ám.

ref: MFI8675.0312


Return to Main Mahr Federal Page


 

Home | TRA Press Room | Portfolio | Services | TRA Advisor | About TRA | e-mail Us

Thomas Rankin Associates